Bản lề lá cùi chỏ H0105

Bản lề lá cùi chỏ H0105. Dành cho hệ cửa tủ. Sản phẩm có thể gia công theo yêu cầu khách hàng.

Thông tin kỹ thuật

- Vật liệu: thép dày 1.5mm

- Màu sắc: giả cổ hoặc xi mạ theo yêu cầu

- Chức năng: bản lề cho cửa tủ

Offset knife hinges provide an unobtrusive way to hinge an inset door.

- Fitting is as shown above and so long as the mortises are cut accurately before assembly installation should present no particular challenge.

- Accurately is the keyword here. The whole aesthetic of this kind of hinge is lost if door fit is poor and very little adjustment is possible after installation.

- To provide a little adjustment after installation the door mortise can be cut a little short and the hinges installed with a singe screw each.

- If after the casework leaves are screwed into place and the door is slid onto its leaves it is found the door need adjustment one or both mortises can be lengthened slightly as necessary.

Bản lề lá cùi chỏ H0105